To remove glue, resin and epoxy use paint remover / solvent such as Nitromores.
Wear protective gloves and glasses.
Paint the solvent onto the contaminated area.
Leave for 10 minutes.
Scrub with brass brush or nail brush in warm soapy water.
Dry thoroughly.

To remove cyanoacrylates / Super glues use Glue buster or Acetone.

Cleaning will change the colour of the tools, but this will not effect their performance.

United Kingdom:-
UF Ultra Fine:- approximately equivalent 420 Grit sandpaper.
F Fine:- approximately equivalent 320 Grit sandpaper.
M Medium:- approximately equivalent 220 Grit sandpaper.
C Coarse:- approximately equivalent 180 Grit sandpaper.
XC Extra Coarse:- approximately equivalent 120 Grit sandpaper.
XXC Extra, Extra Coarse:- approximately equivalent 80 Grit sandpaper

USA:-
UF Ultra Fine:- approximately equivalent 140 Grit sandpaper.
F Fine:- approximately equivalent 120 Grit sandpaper.
M Medium:- approximately equivalent 100 Grit sandpaper.
C Coarse:- approximately equivalent 60 Grit sandpaper.
XC Extra Coarse:- approximately equivalent 46 Grit sandpaper.
XXC Extra, Extra Coarse:- approximately equivalent 24 Grit sandpaper

Yes, we will supply longer blocks in multiples of 280mm (11”)

All Woods, Glass Fibre, Carbon Fibre, Kevlar, Perspex, Plexiglas, Lexan, Acrylics, Plastics, Laminates, MDF, Polystyrene, Brass, Copper, Ceramics, Stone, Slate, Marble, Brick etc.

Yes, but only if the production run is of sufficient quantity.