Rotary Drum FINE finishing Grit, cuts on the end face, make and smooth out hollows.
The FINE ROTARIES enables the user to cut thin,
and fragile materials, leaving the best finish. Also, use them to
debur rough cut or sawn
Rotaries have an integral arbor, enabling them to be used in reversible
They allow the user to cut a wide range
of materials quickly and cleanly leaving an excellent finish.
All rotaries are ideal for routing, shaping and removing materials
without tearing or clogging.
Use on all Woods, Glass Fibre, Carbon
Fibre, PCB, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics,
Polystyrene, Ceramics etc.
Excellent on Perspex, Plexiglass, Lexon, use below 10,000 RPM and they
will not melt, crack or chip them. (not recommended for use on metal)
Note Rotaries should be fully inserted in to the chuck and tightened
before using. Maximum RPM 20,000 Low - Medium.
SAFETY:- Always wear protective goggles when using Rotary Tools.
IMPORTANT:- Carbon Fibre should not be cut using an electric drill,
because of the possibility of electrocution.